Decorating for the holidays: I’m all for simplifying!
Last year, the kittens were less than a year old at Christmas, and we knew that if we brought an 8- or 10-foot tree into the house, it would get crazy in here. This year, Ponyboy has beefed up to about 16 lbs and when the three cats go racing around the living, dining room, and kitchen, he can be a formidable projectile. So we don’t think we’re ready to go back to a real tree, and got the plywood cat-loving tree we made previously, down from the attic.
The coffee table needed some bright color…lucky for me, I had a cache of remnants that would fit the bill.
I started out with a whiteish piece of fabric, which I thought might work for a center square to machine embroider something on. I ended up giving this Urban Threads design a go: it’s a dirigible-driven sleigh for a steam-punk Santa. Then I squared up the fabric to the design, trimming the block to about 9 inches.
Of all the suitable remnants I had lying around in the hoard, I chose a bright red glitter cotton one, a polyester plaid shot through with gold metallic threads, and a polyester shiny metallic green fabric with diamond-patterned raised stitching.
For the lining or backing…I thought something gold would be good–preferably something I had in the stash that was already wide enough so I wouldn’t have to piece it. I brought out several…
Jackpot, of course I picked the one that was wide enough. I pinned it, right sides together, to the pieced and stitched top, sewed around the perimeter, leaving a fist-size opening, then turned the inside out and pressed the edges. Then I stitched around the edge of the finished square.
On the wall above the mantel in back, is what Skip calls…the Family “Palm” Tree.