Halloween Woodworking

An inspiration from one of the You Tube woodworkers: Mitch Peacock’s Hallowood 15 challenge. We haven’t risen to the level where we are confident to take on You Tube challenges yet; maybe next year. But perhaps we can participate through a blog post.
We are still learning how to use some of this new technology, so we set out to see if we could make another tray puzzle, this time with a Halloween theme.

My wife drew a jack-o-lantern outline for me to vectorize and input to the laser software, so I could try cutting out a puzzle with a Full Spectrum laser. My ineptitude in dealing with all the software left me high and dry. I could get the drawing scanned and saved in an XPS format, but when I pulled it into the software all I could do was get a raster file, which I could use to burn an image on the wood but not cut the wood. Evidently you need to use drawing software that lets you save your file in a vector format. So I used the drawing software that came with the laser, albeit pretty simple, and I was able to hammer out what looks like a jack-o-lantern outline with lines added for the puzzle cutouts. My wife can then add embellishments to make it look like a real jack-o-lantern.

A little history to equate this project to the past:
According to the History.com website

“The practice of decorating jack-o’-lanterns [the name comes from an Irish folktale about a man named Stingy Jack] originated in Ireland, where large turnips and potatoes served as an early canvas. Irish immigrants brought the tradition to America, home of the pumpkin, and it became an integral part of Halloween festivities.”

The History.com website has the story of “Stingy Jack” and many other great current and historical content related to Halloween including a video by a master pumpkin carver. The carving of these jack-o-lanterns thus finds its beginnings in Ireland and Britain in the early 19th century. Lighted gourds may date back over 700 years, but not as a Halloween practice.

So here was the procedure for making the Hallowood puzzle:

• Produce a drawing using a vector format. I used the drawing software that came with the laser engraver. It didn’t give us a lot of avenues for creativity, so the pumpkin is pretty simple. My wife embellished it, which made up for the simplicity.

pumpkin drawing

• Laser cut the pattern. I used 7 passes for a laser setting which was perfect for cutting through the 1/8 inch hobby plywood piece. The pattern was about 8 inches by 8 inches. If I had a better grasp of drawing this pattern I would not have cut out each tooth separately. The teeth were too small to be effective puzzle pieces. We left out the teeth and my wife ultimately painted a yellow background on the tray surface. The laser produces such a fine cut that the puzzle pieces fit very tightly in the tray. I had to do some sanding to loosen them up a little.

• Remove the puzzle pieces from the frame and lightly sand the pieces. Cut the frame to size and cut another piece of 1/8 inch plywood to form the back of the tray. Glue the tray back on the frame. Round over the corners, sand and apply a sanding sealer, in this case spray lacquer. Apply a sanding sealer to the puzzle pieces.

• Put the puzzle together and paint. This was the tricky part. The triangles for the eyes and nose were not exactly the same; another result of not knowing what I was doing when I drew the puzzle in the vector format. So once the pieces were arranged properly, my wife came up with a way to paint the pieces so their orientation would be obvious.

• Sign, date and apply a clear coat and give it to some deserving child of appropriate age.

tray puzzle Hallowood 15 craftsbyjennyskip.com
tray puzzle ready to put together
wooden puzzle Hallowood 15 Challenge craftsbyjennyskip.com
painted puzzle

4 thoughts on “Halloween Woodworking”

  1. The finished puzzle is great! Finding software that would work really well could be expensive; I’ve used AutoCAD for similar projects, but that was when I was a student with access to free programs.

    1. we’re going to try inkscape.org, which is a free open-source program..just downloaded and ready to experiment with it. thanks for looking and commenting! (when I was a student it was AutoCAD for DOS…)

Please comment, if you feel so inclined!